1. Starting points of upper and lower lines should be symmetrical. Big asymmetry when it comes to lower lines.

2. All main lines should have extra lines.

3. The pattern could be more Light microblading style (as added sample) - lines divided into smaller and shorter.

4. The upper lines cannot be that long (as some are).

5. The end should be even thinner. the last lower lines should be higher or should not have been done at all.

6. First curvy lines are too long - those areas should be solved with larger number of smaller lines.

7. Some of the lines are too thick and when retouching the blade should hit them more precisely. 

8. Lowwer lines section should be a bit higher and upper lines section thinner.

All main lines must have exta lines.

When retouching the lines the skin should be pulled open so that the blade hits the line perfectly.

Lowe lines can be long, however never that long, those should be divided into parts Light microblading style. 

This pattern is totally ok.

Some of the lower lines should end more horizontal and flow on top of the backbone. Otherwise, really good.

This pattern looks absolutely beautiful. Still, there are some things that could be better. 

The ends of the lower lines should turn a bit more horizontal, on top of the backbone. 

It's easier to fill in the pattern if the section left for the upper lines is vertically shorter. 

Those lines look ok. 

Please always try to hit the lines precisely when retouching.

These upper lines are very good, however to pass to the next level the following this should be ever better.

1. Starting points must be more symmetrical. At the moment too big differences between the starting points. 

2. In the tail section (this has changed over time) there must be more lines! At the moment there is just one.

3. With the new system the length of the upper lines must become shorter after point no 2 (a sample is shown). 

4. The first upper line and the longst of transition should form a nice arche (at the moment those are at different heights).

The direction of your upper lines is very good!

First of all, this brow is excellent. The shape and direction of the lines is very good.

Still there are some things it lacks to be passed. 

1. The tail section of the brow is a little bit too thick (one lower line is not needed).

2. The last upper lines are extremely long - those should be much shorter.

3. Not all upper lines seem to have extra lines.

4. The brow should ne filled in more in the centre and tail section. 

5. The backbone is too low - the vertical space for the upper lines should be smaller.

6. Not all lower lines have correct extra lines - extra lines should be symmetrical and start higher than the main lines. 

7. Starting points of the lower lines should be more symmetrical.

8. The number of upper lines should be greater (in Light microblading, for example, normal count is 10). 

Otherwise, the brow looks nice and is beautiful!

This in sufficient to pass.

Still a couple of suggestions:

1. Starting lines should be filled in more. 
2. The brow is just a little bit too thick in the tail section.
3. The first upper line seems not to have an extra line.
4. The brow should be filled in some more.

Otherwise, it is totally good European ONE brow. You should also try Light microblading brows. 

These upper lines are sufficient to pass to next level.

However, there are some symmetry problems. The upper lines look even better if the starting points are more symmetrical. 

There could be one more upper line in the tail section - in Light microblading the number of upper lines is ever greater.

Transition has errors: the first line should not reach the upper line of the outer frame.

Still, at the moment upper lines were analysed and you were passed.

This is really good. However, to get passes the following should be taken into account:

1. The lower lines should always be bent on top of the back bone. At the moment the tips are facing too upwards.

2. Extra lines should always connect to the end points of the main lines (at the moment those connect too early).

3. Lowe lines starting points symmetry is missing. Starting points should be symmetrical and not wary. It also seems that some of the extra lines are missing to lower main lines.

4. In the tail section of the brow all lines should be directed towards point no 3. At the moment some of those are directed too low. 

5. Upper line symmetry is too much different. The staring points should be symmetrical.

Otherwise really really good progress!

Please follow instructions of the task. 

These are really beautiful brows, however you should draw a sample on the paper of artificial skin as shown in the task.

The overall results looks very good.

However, there can still be minor mistakes:

There can be more beginning lines.

Some of the lower lines seem to be far too long (and probably a bit too deep). 

Still, as has been said, based on the picture and taking into account the fact that all lines can not be seen because of natural brow hair. However, based on that, you can be elevated. 

As a whole this pattern looks nice and can be passed. However, there are some quite important mistakes.

- Symmetry problems between lower main lines.

- Some of the upper extra lines are too short.

- Upper lines can shorten after pt np 2. 

- There should ne nicely curved lines in the beginning.

- The tail section should be closed with lines coming from within the brow, not some extra lower-lines.

Still, as has been said, the overall pattern looks ok. 

The choice of the backbone height is not perfect (too much space for upper lines).

The lines of the transition should be longer.

Lower main lines should be symmetrical.

The longest line of the transition and the first upper line should form a nice curve. 

Still as for FILLERS - it can be paassed. 

This pattern has some mistakes, however you are passed to the next level. 

Mistakes: 

1. the longest line of the transition and the first upper line should form a nice curve - not an angel.

2. All main lines should have an extra line! The last lower main line doesn't have one.

3. Extra lines in between the lines (in the lower section) should always connect to main lines, not hang in there without touching those. 

You are elevated to next level.

There are still mistakes.

1. Some of the lines may be too deep.

2. Some of the upper lines are a bit too long.

3. The brow should be filled more.

4. The end of the brow (pt 6 area) should be thinner and sharper.

You are elevated to the next level.

Still there are mistakes:

1. Symmetry is not correct (between the starting points of the lower lines).

2. Some of the upper main lines should be directed more towards pt no 3. 

3. Always try to hit the end point of the main line. 

4. Both upper and lower extra lines should be longer.

It is absolutely clear that you can draw transitions. However, in this case, Europe ONE basic 3 line combination is needed to be drawn. 

Please use that to get passed. 

Success. Can be passed to the next level.

Still some mistakes: 

- Symmetry between the lower lines is not perfect.

- Brow shape should be more lifted: pt no 3 should be a bit higher (as it is done in Light microblading).

It can be passed.

However, it should be taken into account that in Light microblading the pt no 3 is drawn much higher, almost to the same horizontal line from pt no 1. 

This can be passed. However, some things could be better:

1. Symmetry between the main lower lines is not correct the gap between the last one and second to last is very large.
2. Some retouching of lines has is not absolutely precise - lines should be filled so that "sawing" hits the lines perfectly. 
3. Extra lines should always hit the END point of main lines, i.e. in the tail section of the brow not all do. 

Otherwise, really good and can be passed!

Please send a picture as in the task: one pair of brow outline. 

This is a sheet filled with outlines filled with patterns. 

Unfortunately it can not be passed because of 2 reasons:

1. The lines in the transition (Europe ONE) can not touch each other.
2. The third line is too straight.

Can not be passed for the following reasons:

1. Beginning lines must be curved the same way.
2. Beginning lines must be symmetrical.
3. Beginning lines CANNOT go over or on top of the drawn outer lines.

Can not pass to the next level for the following reasons:

1. The first line of the transition can not start from the lower outer line, there has to be space in between.

2. Lines of the 3-level combination cannot touch each other.

3. The third line of the transition must start vertically underneath the first one.